Here we will show you how to replace the Redmi Note 3 screen. This is a broken screen. Slightly separate the front panel from the rear case. Now remove all the screws from the panel.We can collect the screws on the foam mat to keep them well. Pull out the stickers from the battery first so that we can take out the battery more easily. Use the screen separator to separate the front panel from the mid frame. Set the temperature as 100° C for 3-4 minutes.If you do not have the device,you can use a hair dryer to blow it. After that,use a suction cup to lift the front panel. Use a metal tool to clear the stickers of the mid frame to avoid bright spots or gaps with front panel when you install a new screen with the mid frame. Take out the new screen. It’s important to test the screen before installation.Just test it with the battery and motherboard here. Everything is ok after testing,now taking out the motherboard and battery and start to install the screen on the phone. If you buy the screen from our site,we send this adhesive sticker along with the screen. You can also replace it with the normal adhesive sticker. This adhesive sticker is not included in this item. We use this sticker to paste it with the front panel. It’s done.Power on the phone.